Nikwax TX.Direct Wash-in Technical Material Waterproof Wash Purple purple

TX.DIRECT WASH-IN is the world's number 1 high-performance waterproofing product for breathable waterproof clothing, easy to use, safe and fast. It is fluorocarbon-free and solvent-free. It does not require tumble drying. Provides excellent waterproofing for membrane garments and synthetic filled items such as GORE-TEX® and eVENT®. TX.Direct® is a water-based product that provides waterproofing. It restores and improves the water repellency of fabrics without absorbent linings, makes them easier to breathe, and is easy to use. For best results, remove all non-washable parts. First clean the material to be applied separately with Nikwax® Tech WashTM. There is no need to pre-dry the product to make it waterproof. Shake well before use. Follow the instructions for use. Use in the Machine: Thoroughly clean all residues from previous washes in the detergent compartment of the machine. Put a maximum of 2 items of clothing into the machine. Use 2 scoops (100 ml) of TK.Direct® for 1 item of clothing. Wash at 30°C on low cycle for synthetics. Make sure that the clothes on which TX.Direct® will be applied are cleaned beforehand. Do not wash clothes with damaged seams in the machine.* Hand Washing (Use gloves): Immerse 1 piece of clothing in 6 L of water that is hot enough not to burn your hands. Add 1 scoop (50 ml) of TX.Direct®. Mix well. Let it soak for 5-10 minutes and mix again. Rinse with cold water until the washing water becomes clear. Drying: If compatible with the instructions for use, drying can be done in a low setting dryer or in the open air. Use Nikwax® Tech Wash to maintain waterproofness. Do not use conventional detergents. *Faulty taped seams are sometimes removed from old or worn clothing. After waterproofing and drying, they can be re-glued using a special adhesive. - Propellant gas. - It leaves no trace. - Does not contain fluorocarbons. - It does not harm the environment. - Not tested on animals.